Ford 2013 Flex Owner's Manual page 236

Note: It is your responsibility to stay alert, drive safely and be in control
of the vehicle at all times.
The system adjusts your speed to maintain a proper distance between
you and the vehicle in front of you in the same lane. You can select from
one of four GAP settings. The controls are located on the steering wheel.
At startup, the system sets the gap to the last selected setting. Once
activated, you can deactivate the system at any time by pressing the brake
pedal, pressing the steering wheel OFF control or pressing the CNCL
control. In addition, you can temporarily increase the vehicle speed above
the current speed by manually pressing on the accelerator pedal.
RES
CNCL
SET
ON
OFF
Setting Adaptive Cruise Control
3. Press SET upward and release. The vehicle speed is stored in the
memory.
The information display will show a green indicator light,
current gap setting and desired set speed.
4. Take your foot off the accelerator pedal.
2013 Flex (471)
Owners Guide gf, 4th Printing, December 2012
USA (fus)
Cruise Control
The controls for using your cruise
control are located on the steering
wheel.
GAP
1. Press and release ON.
The information display will show
the gray indicator light, current gap
setting and SET. The system is set
to standby mode.
2. Accelerate to the desired speed.
235