Viewing From A Desired Camera Angle (Multi-Angle) - Pioneer DV-535 Operating Instructions Manual

Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD
You can select a camera angle when viewing DVDs with
the multi-angle option.
LAST
MEMORY
AUDIO SUB TITLE
MENU
SETUP
DISPLAY
¶ 5 5
2
Press ANGLE during playback.
The camera angle changes each time you press the
button.
ANGLE : 1/4
\
»
ANGLE : 4/4
|
Notes
• You can use the Multi-Angle function only with discs
featuring recordings of images shot from different camera
angles.
• During Multi-Angle playback, the
display lights.
• For some discs, selection can be made using the DVD
menu. In this case, press MENU to display the DVD menu
screen and then make your selection.
To check whether or not a disc is recorded with
angles:
The jacket of discs that are recorded with angles will be marked
with . When locations on discs that are recorded with angles
are played back, the indicator can be displayed.
To cancel the angle mark, set [Angle Indicator] to [Off] in the
Setup screen Video menu described in the section below.
OPEN/
CONDITION CLOSE
MEMORY
ANGLE
REPEAT
ANGLE
REPEAT
A-B
TOP MENU
RETURN
¶
3
ANGLE : 2/4
«
ANGLE : 3/4
indicator in the
Turning the angle indicator on and
off
Expert
When a picture recorded in different angles is played
back is displayed on the screen. This setting lets you
see clearly whether the playback picture is recorded in
multiple angles or not.
Turn the angle indicator on or off in the [Angle
Indicator] setting in the Setup screen Video menu in
the [Expert] menu mode (page 24).
Audio1 Audio2 Video
TV Screen –
Video Out –
Still Picture –
On Screen Display – On
OSD Position – Normal
Angle Indicator
Move
Settings: On* ( is displayed)
Off (Not displayed)
Note
Even when the [Angle Indicator] setting is set to [Off], the
indicator in the display panel of the player lights during
multi-angle playback. Therefore, it is possible to know when
the multi-angle function can be used without having to
display the icon on the screen.
Language General
16:9(Wide)
Video
Field
On
Off
SETUP Exit
* Factory setting
29
En