Ford Expedition Owner's Manual page 41

If...
The driver's safety belt is
buckled before the ignition
switch is turned to the on
position or less than 1-2 minutes
have elapsed since the ignition
switch has been turned to on...
The driver's safety belt is not
buckled when the vehicle has
reached at least 6 mph
(9.7 km/h) and 1-2 minutes have
elapsed since the ignition switch
has been turned to on...
The driver's safety belt becomes
unbuckled for approximately one
minute while the vehicle is
traveling at least 6 mph
(9.7 km/h) and more than
1-2 minutes have elapsed since
the ignition switch has been
turned to on...
Deactivating and Activating the Belt-Minder Feature
WARNING: While the design allows you to deactivate your
Belt-Minder , this system is designed to improve your chances of
being safely belted and surviving an accident. We recommend you leave
the Belt-Minder system activated for yourself and others who may use
the vehicle. To reduce the risk of injury, do not deactivate or activate
the Belt-Minder feature while driving the vehicle.
Read Steps 1 - 9 thoroughly before proceeding with the deactivation
and activation programming procedure.
The Belt-Minder feature can be deactivated or activated by performing
the following procedure:
Before following the procedure, make sure that:
• the parking brake is set.
• the transmission selector lever is in position P.
• the ignition is off.
2013 Expedition (exd)
Owners Guide gf, 1st Printing
USA (fus)
Safety Belts
Then...
The Belt-Minder feature will not
activate.
The Belt-Minder feature is activated -
the safety belt warning light illuminates
and the warning chime sounds for six
seconds every 25 seconds, repeating for
approximately five minutes or until the
safety belts are buckled.
The Belt-Minder feature is activated -
the safety belt warning light illuminates
and the warning chime sounds for six
seconds every 25 seconds, repeating for
approximately five minutes or until the
safety belts are buckled.
41