Ford Expedition Owner's Manual page 142

142
Connecting an MP3 Device
Connecting an MP3 Device to Your DVD-headrest Module via USB
Plug the MP3 Dock Connector to USB cable into a high-power USB port
on your DVD-headrest module, and then connect the other end to the
player.
See the documentation that came with your device for more information.
Charging the MP3 Player Battery
Connect the device to the USB port on your DVD-headrest module. The
DVD-headrest module must be turned on. Depending on the device, it
may or may not charge when connected to the USB port.
Note: Not all devices are able to charge when connected to the USB
port.
Connecting an MP3 Device to Your DVD-headrest Module via A/V
Cable
1. Connect the device using an A/V cable to the headphones port .
Note: Use the A/V cable made specifically for the device. Other
similar RCA-type cables might not work.
2. Connect the video and audio connectors to the AV-IN ports on your
DVD-headrest module, matching the yellow, red and white
connectors to the appropriate jacks.
Troubleshooting
Symptom
Device does not power
on
IR sensor inoperative
Disc does not play
2013 Expedition (exd)
Owners Guide gf, 1st Printing
USA (fus)
Audio System
Possible Cause
• Vehicle ignition is not turned on.
• Batteries not installed in remote control.
• Batteries in remote control are not working.
• Remote sensor eye is blocked.
• The infrared transmitter is affixed over the
sensor eye of the component to be controlled.
• The disc was inserted backward.
• The disc is defective. Try another disc.
• The disc is not compatible with the
entertainment system.
• The device code and disc region code do not
match. This device is set to Region 1.