Racks - GE PT970SMSS Owner's Manual

Microwave/convection cooking center - 30" double wall oven
Hide thumbs Also See for PT970SMSS:
Table of Contents

Advertisement

Available languages

Available languages

Care and cleaning of the cooking center.
Socket
Receptacle
Bulb
Tab
Glass cover
Oven rack
44
Lower Oven Light Bulb
NOTE: The glass cover (on some
models) should be removed only when
cold. Wearing latex gloves may offer
a better grip.
CAUTION
: Before replacing your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel.
Be sure to let the light cover and bulb
cool completely.
For your safety, do not touch a hot bulb
with bare hands or a damp cloth.
To remove:
Turn the glass cover
counterclockwise 1/4 turn until the
tabs of the glass cover clear the
grooves of the socket.
Using gloves or a dry cloth, remove
the bulb by pulling it straight out.
To replace:
Use a new 130-volt halogen bulb,
not to exceed 50 watts.
Using gloves or a dry cloth, remove
the bulb from its packaging. Do not
touch the bulb with bare fingers.
Oven Racks
Clean the oven racks with an abrasive
cleanser or steel wool. After cleaning,
rinse the racks with clean water and dry
with a clean cloth.
NOTE: The oven racks may be cleaned in the
self-cleaning oven. However, the racks will
darken in color, lose their luster and become hard
to slide if cleaned during the self-cleaning cycle.
Stainless Steel Surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
Receptacle
Push the bulb straight into the
receptacle all the way.
Place the tabs of the glass cover into
the grooves of the socket. Turn the
glass cover clockwise 1/4 turn.
For improved lighting inside
the oven, clean the glass cover
frequently using a wet cloth. This
should be done when the oven is
completely cool.
Reconnect electrical power to
the oven.
To make the racks slide more easily,
apply a small amount of vegetable oil or
cooking oil to a paper towel and wipe the
edges of the oven racks with the paper
towel.
(on some models)
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest you,
please call our toll-free number:
National Parts Center
1.800.626.2002
ge.com
Use gloves
or cloth

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents