Connecting A Video Cassette Recorder - Panasonic DMR-HS2 Operating Instructions Manual

Connecting a video cassette recorder

When connecting to the AV3/DV input terminals on the
front of the unit
Audio/Video cable
(1)
(2)
(3)
(1) Yellow (VIDEO)
(2) White (L)
(3) Red (R)
(4)
(7)
(4) S video cable (not supplied)
(5) Audio/Video cable (not supplied)
(6) 4-pin DV cable (not supplied)
(7) Other playback equipment
≥Connect to the video and audio output terminals.
Note
≥If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
≥The DV input on this unit is for use with DV cameras only.
(1)
(2)
(3)
(5) (6)
Upgrading your system (continued)
When connecting to the input terminals on the rear of
the unit
Audio/Video cable
(1)
(2)
(3)
(1) Yellow (VIDEO)
(2) White (L)
(3) Red (R)
Rear panel of this unit
R - AUDIO - L
OPTICAL
DIGITAL AUDIO OUT
R - AUDIO - L
(PCM/BIT STREAM)
(4)
(6)
(4) Audio/Video cable (not supplied)
(5) S video cable (not supplied)
(6) Other playback equipment
≥Connect to the video and audio output terminals.
Note
If audio output of the other equipment is monaural, use a
stereo-monaural conversion cable (not supplied).
71
(1)
(2)
(3)
VIDEO S-VIDEO
VIDEO S-VIDEO
(5)