Timer Recording; How View - Panasonic DMR-HS2 Operating Instructions Manual

Using S V * (G-
HOW IEW

timer recording

* S V : for Continental Europe.
HOW IEW
G- : for Australia and N.Z..
CODE
G- and S V are different trademarks used to
CODE HOW IEW
represent the same easy recording feature. However, for
simplicity, only the term S
HOW
G- system, follow the same steps listed for the S
CODE
system.
[HDD] [RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme's S
number, which can be found in the television sections of
newspapers or in television guides. You can programme up to 32
programmes one month in advance. Programmes for everyday or
every week are counted as one programme.
Preparation
≥Switch [DVD, TV] (15) to "DVD".
≥Ensure that this unit's clock is set correctly.
≥(Make sure there is sufficient empty space on the disc for the
programme you are going to record plus a little extra.)
Recording to the HDD:
Confirm there is sufficient empty space for recording on the
HDD. (page 26)
Recording to the disc:
Insert a disc that can be written to.
- Check that disc can be recorded on (page 10).
- Ensure the write protect tab is not set to "PROTECT"
(page 87).
- Ensure the disc is not write-protected with DISC
INFORMATION (page 39).
1 Press [ShowView] ([G-Code]) (2) button.
<S V >
HOW IEW
ShowView
35:39 LP 4:00 LP
Remain HDD DVD
12:53:00 16. 7 TUE
Enter ShowView Number by using 0-9 key.
No.
0 -- 9
RETURN
Press the numeric buttons (4) to enter the
2
S V (G- ) number.
HOW IEW CODE
ShowView 35:39 LP 4:00 LP
Remain HDD DVD
12:53:00 16. 7 TUE
1 1 1 1 1 1 1 1 1
≥If you enter the wrong digit, use [2] (10) to move back and
enter the correct digit.
Press [ENTER] (10).
3
≥The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
TIMER
35:39 LP 4:00 LP
Remain HDD DVD
RECORDING
12:53:00 16. 7 TUE
VPS HDD
Name Date Start Stop Mode
PDC DVD
1 ARD 16/ 7 TUE 20:00 21:00 SP OFF HDD
Title
Press ENTER to store new programme.
SELECT
CANCEL
RETURN
ENTER
≥Check the programme.
To make corrections - Recording date, Recording time,
Recording mode or VPS/PDC setting etc (page 33).
To programme other recordings, repeat steps 1, 2, and 3.
Confirm that "HDD/DVD" is selected and use [3, 4]
4
(10) to select the recording drive (HDD/DVD).
Timer recording
) number to make
CODE
V will be used. If you use
IEW
HOW
V (G- )
HOW IEW CODE
<G- >
CODE
G-CODE
35:39 LP 4:00 LP
Remain HDD DVD
12:53:00 16. 7 TUE
Enter G-CODE Number by using 0-9 key.
No.
0 -- 9
RETURN
G-CODE 35:39 LP 4:00 LP
Remain HDD DVD
12:53:00 16. 7 TUE
1 1 1 1 1 1 1 1 1
TIMER
35:39 LP 4:00 LP
Remain HDD DVD
RECORDING
12:53:00 16. 7 TUE
VPS HDD
Name Date Start Stop Mode
PDC DVD
1 ARD 16/ 7 TUE 20:00 21:00 SP OFF HDD
Title
Press ENTER to store new programme.
SELECT
CANCEL
RETURN
ENTER
5
If the programme is correct
Press [ENTER] (10).
≥The Timer Programme List screen appears.
TIMER
Remain
RECORDING
No. Name Date Start
01 1 ARD 16/ 7 TUE 20:00
New Timer Programme
V
IEW
SELECT
CANCEL
RETURN
ENTER
Press [RETURN] (23).
6
ªTo put the unit on recording standby
Press [Á, TIMER] (12).
≥Ensure "Á" lights on the unit's display.
≥The unit is not off. To save electricity, turn the unit off by pressing
[DVD, Í] (1).
≥If the unit is turned on when it is in timer recording standby mode,
a message screen will be displayed. When in this state the unit
can be used for playback* and JPEG operations, but it is not
possible to use the tuner on the unit to view television
broadcasts.
* The unit can only play the currently set TV system if the unit is
in timer recording standby mode.
Timer standby is active, only playback is possible.
ªIf "– –" appears under "Name" after entering a
S V (G-
HOW IEW
Name stands for Programme Position/TV Station Name.
Normally, the name of the TV station or the number of the
programme position is displayed under "Name".
However, if the TV station information was not automatically set
during Preset Downroad or Auto Setup due to adverse reception
conditions, the "– –" indication appears instead.
In such a case, follow the operation steps below to correct it.
Use [3, 4] (10) repeatedly to select the programme
position on which the TV programme to be recorded
will be broadcast.
After you have entered the information of a TV station, it remains
stored in the unit's memory, and you do not need to enter it again
in the future.
32
35:39 LP 4:00 LP
HDD DVD
12:57:00 16. 7 TUE
VPS HDD Disc
Stop Mode space
PDC DVD
21:00 SP OFF OK
) number
CODE