Manual Programming - Panasonic DMR-HS2 Operating Instructions Manual

Manual programming

[HDD] [RAM] [DVD-R]
Remote control only
You can set your own programming conditions (up to 32
programmes).
Preparation
≥Switch [DVD, TV] (15) to "DVD".
≥Ensure that this unit's clock is set correctly.
≥(Make sure there is sufficient empty space on the disc for the
programme you are going to record plus a little extra.)
Recording to the HDD:
Confirm there is sufficient empty space for recording on the
HDD. (page 26)
Recording to the disc:
Insert a disc that can be written to.
- Check that disc can be recorded on (page 10).
- Ensure the write protect tab is not set to "PROTECT"
(page 87).
- Ensure the disc is not write-protected with DISC
INFORMATION (page 39).
Press [PROG/CHECK] (13).
1
≥The Timer Programme List screen appears.
TIMER
35:39 LP
Remain HDD DVD
RECORDING
1:19:00
VPS HDD
No. Name Date Start Stop Mode
PDC DVD
01 1 ARD 16/ 7 TUE 20:00 21:00 SP ---
New Timer Programme
SELECT
Press ENTER to store
new programme.
ENTER RETURN
A line that is ready for programming is highlighted.
Press [ENTER] (10).
2
≥The Timer Programme Correction screen appears.
TIMER
35:39 LP
Remain HDD
RECORDING
Name Date Start Stop Mode
: :
/ LP
Please set Channel.
SELECT
No.
--
RETURN 0 9
ENTER
3 Use [1] (10) to move through the items and change
the items with [3, 4] (10).
≥The current settings are shown each time you press [1]
(10).
≥You may use the numeric buttons (4) to enter "Name",
"Date", "Start" and "Stop".
TIMER
35:39 LP
Remain HDD
RECORDING
Name Date Start Stop Mode
1 ARD 20/ 7 SAT 17:00 19:00 LP
≥Name (Programme Position/TV Station Name)
≥Date
Current date>the day before one month later>
Daily (Sunday to Saturday)>Daily (Monday to Saturday)>
Daily (Monday to Friday)>Weekly (Sundays)>...>
Weekly (Saturdays)
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥Mode (Recording mode)
XP>SP>LP>EP>FR (page 26)
≥VPS/PDC (For Continental Europe)
jjj
ON()OFF ( ) (page 33)
4:00 LP
16. 7 TUE
Disc
space
OK
4:00 LP
DVD
1:19:10 16. 7 TUE
VPS HDD
PDC DVD
Title
4:00 LP
DVD
1:19:10 16. 7 TUE
VPS HDD
PDC DVD
--- HDD
Title
≥HDD/DVD
Specify the recording drive of the standby timer recording.
HDD()DVD
≥RENEW (Auto Renewal Recording) [HDD] (page 35)
If you record a programme onto HDD repeatedly everyday or
every week using timer recording, the unit will record the new
programme over the old one.
This is only displayed when "HDD" is selected from "HDD/
DVD" and if you are selecting to record either a daily or
weekly basis in "Date".
For daily recordings, select (Sunday to Saturday), (Monday
to Saturday) or (Monday to Friday).
For weekly recordings, select the appropriate day.
OFF()ON
≥Title
It is possible to enter the title of the programme. (page 35)
Press [ENTER] (10) when you have finished making
4
changes.
≥To continue programming:
Repeat steps 2, 3, and 4.
Press [PROG/CHECK] (13) or [RETURN] (23).
5
ªTo put the unit on recording standby
Press [Á, TIMER] (12).
≥Ensure "Á" lights on the unit's display.
≥The unit is not off. To save electricity, turn the unit off by pressing
[DVD, Í] (1).
≥If the unit is turned on when it is in timer recording standby mode,
a message screen will be displayed. When in this state the unit
can be used for playback* and JPEG operations, but it is not
possible to use the tuner on the unit to view television
broadcasts.
* The unit can only play the currently set TV system if the unit is
in timer recording standby mode.
Timer standby is active, only playback is possible.
ªTo change the timer recording programme
1) While the Timer Programme List Screen is being shown, use
[3, 4] (10) to select the programme you want to change, and
press [ENTER] (10) to show the Timer Programme Correction
screen.
≥You may also select programme by inputting a 2-digit
number using the numeric buttons (4).
≥Use [2, 1] (10) to move to the page preceding or following
the one on display.
2) Move through the items with [1] (10) and change the settings
with [3, 4] (10) and press [ENTER] (10).
34
Timer recording (continued)