Advertisement
Available languages
Available languages
DESCRIPTION OF SPECIAL
FUNCTIONS
Toner save mode (page GB-11)
Reduces toner consumption by approximately 10%.
Power save modes (page GB-12)
The copier has two power save modes of operation:
preheat mode and auto power shut-off mode.
Modo preriscaldamento
When the copier enters the preheat mode, the power
save (
) save indicator will light up and other indicators
will remain on or off as before. In this condition, the fuser
in the copier is maintained at a lower heat level, thereby
saving power. To copy from the preheat mode, make
desired copier selections and press the print (
using the normal copying procedure. To exit from the
preheat mode, press any key.
Auto power shut-off mode
When the copier enters the auto power shut-off mode,
the power save ( ) indicator will light up and other
indicators will go out. The auto power shut-off mode
saves more power than the preheat mode but requires a
longer time before starting copying. To copy from the
auto power shut-off mode, press the print (
make desired copier selections and press the print (
key using the normal copying procedure. To exit from the
auto power shut-off mode, press the print (
Auto clear (page GB-12)
The copier returns to the initial settings a preset amount
of time after the last copy is made.
This preset amount of time (auto clear time) can be
changed.
TONER SAVE MODE
1. Press the exposure mode selector key to select the
manual (
=
2. Press and hold down the exposure mode selector key
for approximately 5 seconds.
) key
The manual (
(
) indicator will begin to blink. The exposure indica-
) key. Then
tor marked "5" will light up, indicating the standard
)
toner mode is active.
) key.
3. To enter the toner save mode, press the light (
The exposure indicator marked "1" will light up, indica-
ting the toner save mode is selected.
4. Press the exposure mode selector key twice. The
photo (
indicator will light up steadily. The toner save mode is
now active.
To return to the standard mode, repeat the
procedure but use the dark ( ) key to select
exposure level "5" in step 3.
) mode.
=
) indicator will go out and the photo
) indicator will stop blinking and the AUTO
{
) key.
GB-11
Advertisement
Chapters
