Auto-Provision - ZyXEL Communications P-27xx Series User Manual

4.2 Auto-Provision

Click Maintenance > System > Auto Provision to open this screen. If you need
to provision more than one ZyXEL Device, use this screen to back up (save) the
ZyXEL Device's current configuration to a text file on your computer. Edit the
configuration file using a text editor and put it on an auto-provisioning server.
Then configure the ZyXEL Device to download the configuration file (and firmware)
automatically from the auto-provisioning server, meaning you do not have to
upload them manually.
Figure 12 Auto Provision
The following table describes the labels in this screen.
Table 10 Auto Provision
LABEL
Backup Auto-provision File
Backup
Auto Provision
Protocol
HTTP/TFTP/FTP
Server Address
HTTP Server
Port
FTP Username
P-27XX Series User's Guide
DESCRIPTION
Click Backup to save the ZyXEL Device's auto-provisioning
configuration file to your computer.
Select the networking protocol (HTTP, TFTP or FTP) you want to use to
access the auto-provisioning server to download the configuration file.
Otherwise, select Disable to not request and receive auto-provisioning
files.
Enter the auto-provisioning server IP address.
If you select to transmit the auto-provisioning configuration file using
HTTP, enter the server's port number.
If you select to transmit the auto-provisioning configuration file using
FTP, enter your FTP account user name for authentication.
Chapter 4 Maintenance
33