Denon DVD-3930 Operating Instructions Manual page 21

Making the initial settings
1
2
3
4
The display differs
depending on the
connected speaker.
• To return to the setting screen:
Press [RETURN].
¢ Channel level
Set the volume of the different speakers so that the test tones output
from them sound to have the same volume.
1
At the HDMI speaker setting screen, use
select "CHANNEL LEVEL", then press
2
[D D H H ]
Use to select "TEST TONE", use
[ENTER]
to make the settings, then press
OFF:
No test tones are output.
AUTO:
Adjust the volumes while listening to the test tones output
automatically from the different speakers.
MANUAL:
Switch the speaker from which the test tone is output manually as
you adjust the volumes.
3
If "AUTO" is selected:
[F F G G ]
Use to adjust the volume.
-1
• The volume can be adjusted between the range of 0 to –10 dB.
• The test tones are output automatically in the order shown
below.
FRONT LCH CENTER
SUBWOOFER SURROUND LCH
3
If "MANUAL" is selected:
[D D H H ]
Use to select the speaker, use
-2
[ENTER]
the volume, the press .
18
ENGLISH
1
[D D H H ]
to
[ENTER]
.
[F F G G ]
again
.
3
-1
FRONT RCH
SURROUND RCH
[F F G G ]
to adjust
• To return to the setting screen:
Press [RETURN].
ENGLISH
Making the initial settings
2
3
-2