Video Setting; Setting The Tv Aspect Ratio; Setting The Tv Type; Setting The Component Video Output - Denon DVD-3930 Operating Instructions Manual

Making the initial settings

Video setting (

)
[F F G G ]
Use to select " ".

Setting the TV aspect ratio

Set this according to the screen of the connected TV.
1
[D D H H ]
Use to select "TV ASPECT", then press
[ENTER]
.
2
[D D H H ]
Use to select the item to be set, then press
[ENTER]
.
4:3 PS:
Select this if the screen's vertical:horizontal ratio is 4:3.
Software recorded in wide screen format is played in the pan & scan
mode (with the left and right sides of the screen cut. Software for
which pan & scan is not specified, however, is played in the letter
box mode (with black bands at the top and bottom of the screen).
4:3 LB:
Select this if the screen's vertical:horizontal ratio is 4:3.
Software recorded in wide screen format is played in the letter box
mode.
WIDE (16:9) (Upon purchase):
Select this when a wide-screen TV is connected.
Software recorded in wide screen format is played over the entire
screen.
1
2

Setting the TV type

Set this according to the video format of the connected TV.
1
[D D H H ]
Use to select "TV TYPE", then press
2 [D D H H ]
Use to select the item to be set, then press
[ENTER]
.
NTSC:
Select this if the connected TV is of the NTSC type.
PAL:
Select this if the connected TV is of the PAL type.
MULTI (Upon purchase):
Select this if the connected TV is of both the NTSC and PAL types.
1
2
• The picture will not be displayed properly if a video format different
from the connected TV's type is set.
20
ENGLISH

Setting the component video output

Use this procedure to set the DVD-3930's component video output
format.
[ENTER]
.
1
[D D H H ]
Use to select "COMPONENT VIDEO OUT",
[ENTER]
then press .
2
[D D H H ]
Use to select the item to be set, then press
[ENTER]
.
PROGRESSIVE (Upon purchase):
Sets to the progressive format.
In this format there is less flickering than with the interlaced format.
INTERLACED:
Sets to the interlaced format.
1
2
• When outputting video signals from the HDMI terminal, the video
signals output from the component video terminals are interlaced.
ENGLISH
Making the initial settings