Door Lock Diagrams - Avital Diablo Installation Manual

4. Connect the alarm BLACK wire to the other 10mm ring terminal.
5. Remove the (+) and (-) battery bolts. Do not disconnect the battery
clamps.
6. Connect the empty fuse assembly(s) to the positive battery post.
7. Connect the alarm BLACK wire to the battery negative post.
8. Inspect all alarm wiring. Make sure all wires are connected.
9. Install the 5 amp fuse in the alarm module RED wire fuse assembly.
10. Install the 20 amp fuse in the alarm module RED/WHITE fuse
assembly (if the vehicle parking lights are positive).
Diablo
Nega tive Trig ger Door Locks
10
2
/AMX 68/AT-58 Installation Manual 3/31/99