Diablo /AMX 68/AT-58 Owner's Manual 12/29/97...
Standard Features Standard Features þ Life time War ranty — We guarantee the operation of the control unit þ Life time War ranty — We guarantee the operation of the control unit and remote controls for as long as you own your car (see the enclosed and remote controls for as long as you own your car (see the enclosed warranty card for details).
þ In te rior Light Il lu mi na tion Ca pa bil ity — When remotely disarmed, the alarm system turns on the interior lights for 30 seconds or until the ignition key is turned on (requires an optional relay). þ...
þ Re mote Con trol Door Lock Ca pa bil ity — Allows you to lock and unlock your doors without using your key (may require optional relays). þ User Pro gram ma ble Pas sive Door Lock ing — Allows you to program the system to automatically lock the doors every time the alarm passively arms.
Operating Instructions Remote Control — Each of the pair of remote controls is a miniature radio transmitter with a typical range of up to 100 feet. Obstructions, radio interference, cellular transmissions or a weak remote control battery may reduce the range or interrupt transmission. (If the system does not immediately respond, release and press the button again.
To Silently Arm or Disarm the System — Press remote button #3 for 1-2 seconds. Si lent Arm In di ca tions. The parking lights will flash twice, the doors will lock, the starter will be disabled and the LED will flash slowly.
Turn off Valet Mode 1. Turn your ignition key to the "ON" position or start the vehicle. 2. Flick the valet switch to the "OFF" position. 3. The LED will turn off to indicate the alarm is no longer in Valet Mode.
Previous Intrusion Alert — If the vehicle had been tampered with and the alarm has been triggered, the siren will chirp 3 times upon remote disarm instead of the usual 1 chirp. Specific Intrusion Identification — If the alarm had been triggered in your absence, the siren will chirp 3 times upon remote disarm (Previous Intrusion Alert).
How to Interpret the Chirps and Parking Light Flashes When you press the remote control buttons, the system will respond with chirps (unless you have the chirp muting feature turned on or the system is in Valet Mode) and flashes of the parking lights to indicate the system status.
Programming Alarm System Features All programmable alarm features are accomplished by turning the ignition key on (or starting the vehicle) and flicking the valet switch on and off a preset number of times. 1. Remove the alarm from Valet Mode. Programming cannot be accessed while the alarm is in Valet Mode, indicated by the LED on solid red.
Programming Your Remote Controls The alarm allows the user to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote control configuration. All remote control programming features are accomplished by turning the ignition key on (or starting the vehicle) and flicking the valet switch on and off a preset number of times.
Pro gram ming Ta ble for Re mote Controls Fac tory # of Fea ture Set ting Chirps All Channel — Learn Instant Code — Deletion Diablo /AMX 68/AT-58 Owner's Manual 12/29/97 Re mote Con trol Sec on dary Ac tion Press button #1.
© Copyright 1998 Avital Technologies, Inc. 31-1241/98 Diablo /AMX 68/AT-58 Owner's Manual 12/29/97...