Adjusting The Tension Of The Door Spring - Baumatic BDS670BL Insrtuction Manual

o Fully tighten the screws into the holes. Make sure that you screw
them tightly into the furniture door.
o Replace the covers.

Adjusting the tension of the door spring

o After the furniture door has been adjusted, you will need to
adjust the tension of the door spring.
o Using an Allen key, rotate the adjusting screw to either tighten
or slacken the steel cable.
o The doors' spring tension is correct when:-
a) The door remains horizontal when in the fully opened
position.
b) You are able to shut the door easily, by raising the door using
your fingers.
o WARNING: If you do not adjust the tension of the door spring,
then it could cause damage to the appliance.
o The door of the dishwasher is
attached to springs. These
are set at the factory to
ensure that they are at the
proper tension, so that the
door can open and close
smoothly.
36