Setting The Water Softener Level; Filling With Rinse Aid - Baumatic BDS670BL Insrtuction Manual

o IMPORTANT: You do not need to pour 1 litre of water into
the container when you subsequently fill the water
softener with salt.

Setting the water softener level

It is possible to regulate the amount of salt that the water softener will
release during a wash cycle. The water softener should be set to a
level that is appropriate for the hardness of your water (please refer to
the table below).
To alter the amount of salt that is released by the water softener, you
should:-
o Remove the lower basket and unscrew the cap from the salt
container.
o Locate the ring with an arrow on it that is located on the salt
container. (See figure opposite).
o The "middle" selector position is halfway between the minus and
plus symbols.
o IMPORTANT: If you are using 3 in 1 dishwasher tablets and live
in a medium or hard water area, then you should still fill the
water softener with salt. The water softener arrow should be
turned to the minus setting.

Filling with rinse aid

The rinse aid is released during the final rinse and it helps
to prevent water from forming droplets on your dishes.
o When you first receive your appliance, the arrow
will be pointing to the minus symbol. Using the
water hardness chart, you should turn the arrow
to the setting that is appropriate for your water
hardness.
12