Handling - Canon LBP3200 User Manual

- Do not connect one extension cord to another.
- Make sure that the voltage of the power plug is the one indicated in the rating label
(attached on the back of the printer) when you use the printer.
- Use an extension cord that allows the current value greater than the necessary one
indicated in the rating label (attached on the back of the printer).
- When you use an extension cord, untie the cord binding, and insert the power plug
completely into the extension cord outlet to ensure a firm connection between the
power cord and the extension cord.
- Periodically check that the extension cord is not overheated.
CAUTION
Do not use power supplies with voltages other than those specified herein, as this
•
may result in a fire or electrical shock.
Always grasp the power plug when unplugging the power cord. Pulling on the power
•
cord may expose or snap the core wire, or otherwise damage the power cord. If the
power cord is damaged, this could cause current to leak, resulting in a fire or
electrical shock.
Leave sufficient space around the power plug so that it can be unplugged easily. If
•
objects are placed around the power plug, you will be unable to unplug it in an
emergency.

Handling

WARNING
Do not attempt to disassemble or modify the printer. There are high-temperature and
•
high-voltage components inside the printer which may result in a fire or electrical
shock.
Electrical equipment can be hazardous if not used properly. To avoid injury, do not
•
allow children access to the interior of any electrical product and do not let them
touch any electrical contacts or gears that are exposed.
If the printer makes strange noises, or emits smoke, heat or unusual smells,
•
immediately turn OFF the power switch, and disconnect the USB cable if you use it.
Then, unplug the power plug from the AC power outlet, and contact the shop that you
purchased this printer.
Do not use highly flammable sprays near the printer. If gas from these sprays comes
•
into contact with the electrical components inside the printer, it may result in a fire or
electrical shock.
To avoid damage to the power cord and creating a fire hazard, always turn OFF the
•
power switch, and disconnect the USB cable when moving the printer. Otherwise, the
power cord or USB cable may be damaged, resulting in a fire or electrical shock.
xvii