Emc Directive (220 - 240 V Model) - Canon LBP3200 User Manual

■ 220 - 240 V model
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Use of shielded cable is required to comply with Class A limits in Subpart B of Part 15 of
•
FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in
the manual. If such changes or modifications should be made, you could be required to
stop operation of the equipment.

EMC Directive (220 - 240 V model)

"This equipment has been tested in a typical system to comply with the technical
requirements of EMC Directive."
Use of shielded cable is necessary to comply with the technical requirements of
•
EMC Directive.
The product is in conformity with the EMC directive at nominal mains input 220 -
240 V, 50 Hz although the rated input of the product is 220 - 240 V, 50/60 Hz.
C-tick marking
conformity with the relevant requirements at nominal mains input 240 V, 50 Hz
although the rated input of the product is 220 - 240 V, 50/60 Hz.
on the rating label means that we declare the product is in
xi