Power Supply - Canon LBP3200 User Manual

CAUTION
Do not install the printer in unstable locations, such as unsteady platforms or
•
inclined floors, or in locations subject to excessive vibrations, as this may cause the
printer to fall or tip over, resulting in personal injury.
Never block the ventilation slots on the printer. The vantilation slots are provided for
•
proper ventilation of working parts inside the printer. Blocking the vantilation slots
can cause the printer to overheat, resulting in a fire. Never place the printer on a soft
surface, such as a sofa or rug.
Do not install the printer in the following locations:
•
- A damp or dusty location
- A location exposed to smoke and steam such as cookeries and humidifiers.
- A location exposed to rain or snow.
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
When installing the printer, gently lower the printer onto the floor or other machine to
•
avoid catching your hands, as this may result in personal injury.
When connecting the USB cable, connect it properly according to this manual. If not
•
connected properly, this may result in malfunction or electrical shock.
When moving the printer, follow the instructions in this manual to hold it correctly.
•
Failure to do so may cause you to drop the printer, resulting in personal injury.

Power Supply

WARNING
Do not damage or modify the power cord. Also, do not place heavy objects on the
•
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
Keep the power cord away from a heat source; failure to do this may cause the power
•
cord coating to melt, resulting in a fire or electrical shock.
Do not plug or unplug the power plug with wet hands, as this may result in electrical
•
shock.
Do not plug the power cord to a multiplug power strip, as this may cause a fire or
•
electrical shock.
Do not bundle up or tie the power cord in a knot, as this may result in a fire or
•
electrical shock.
Insert the power plug completely into the AC power outlet, as failure to do so may
•
result in a fire or electrical shock.
Do not use power cords other than the power cord provided, as this may result in a
•
fire or electrical shock.
As a general rule, do not use extension cords or plug extension cords to a multiple
•
power strip. If extension cords must be used or plugged to a multiple power strip,
however, use them observing the following points on user's own authority. If you use
extension cords improperly, this may result in a fire or electrical shock.
xvi