Replacing The Toner Cartridge - Canon LBP3200 User Manual

Laser beam printer
Hide thumbs Also See for LBP3200:
Table of Contents

Advertisement

5
5
If the print is too thin even after performing the operation above, replace the toner
cartridge with a new one.

Replacing the Toner Cartridge

Follow the procedure below to replace the toner cartridge with a new one.
After replacing the toner cartridge, be sure to perform cleaning. For instructions on
how to perform cleaning, see "Cleaning," on p. 5-12.
WARNING
Do not burn or throw a used toner cartridge into open flames, as this may cause
the toner remaining inside the cartridge to ignite, resulting in burns or a fire.
CAUTION
Take care not to allow the toner to come into contact with your hands or
clothing, as this will dirty your hands or clothing. If they become dirty, wash
them immediately with cold water. Washing with warm water will set the toner
and make it impossible to remove the toner stains.
5-6

Replacing the Toner Cartridge

Close the front cover.
IMPORTANT
If you cannot close the front cover, confirm that the toner cartridge is set properly. If
you close the front cover forcefully, this may cause damage to the printer.
Do not leave the front cover open for a long time after setting the toner cartridge.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laser shot lbp3200

Table of Contents