Navigate To A Location Stored In A Picture - Alpine INE-W970BT User Manual

3.1.8 Navigate to a location stored in a picture

You can also set the location stored in a picture as your destination. Do as follows:
1. In the Navigation menu, tap
2. Open the
3. The list of picutres stored on the USB memory appears. Select one picture from the
list.
4. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
location. Tap
5. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
Only geotagged JPG files contain location information. That is why these kind of
files can only be used in navigation. Other picture files do not appear in the list.
Note!
Files must be located on an inserted USB memory, in a "pictures" folder.
.
menu and tap
to confirm the destination, or tap
to select a different destination.
and start your journey.
50
.
) appears at the new
to modify route