Using The Cursor (The Selected Map Location) - Alpine NVE-M300P Owner's Manual

NVE-M300P Navigation Module Owner's Manual

6.2.4 Using the Cursor (the selected map location)

First, place the Cursor at the desired map location with one of the following options:
•
Use the Destination menu to select a location. The map returns with the selected point
(the Cursor) in the middle, and the Cursor menu appears with the available options.
•
Tap the screen and tap again to place the Cursor at the desired location. Now tap
to open the Cursor menu.
You can perform the following actions:
Button
20
Creates a new route with the Cursor as the destination. The previous route
(if exists) is deleted.
Opens the full-screen Cursor menu with all the possible options.
The location of the Cursor is saved as the Home address.
The Cursor is saved as a user POI. Select the POI group and give a name
for the POI, then select a su itable icon, enter a phone number, and
additional information if you like.
The Cursor becomes the start point of the route. This means that the route
is not started from the current GPS position, and Automatic Off- route
Recalculation needs to be turned off to keep the selected point as the start
point.
This button is similar to the
opens, and the route is calculated with all the possible route calculation
methods (Fast, Short, Economical and Easy). Observe the results, and
choose one of the routes to navigate.
The Cursor is added to the active route as an intermediate route point , a
point to be reached before the destination. If there is already a waypoint in
the route, the Edit Route screen opens to let you decide where the new
waypoint is to appear in the route.
The location of the Cursor is added to the list of frequently visited
destinations, the so called Favourites. You can give a name for the
Favourite.
Autogood products «130»
Description
button, but a new screen