Navigate To A Location Stored In A Picture - Alpine INE-W925R User Manual

location. Tap
7. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap

3.1.8 Navigate to a location stored in a picture

You can also set the location stored in a picture as your destination. Do as follows:
1. In the Navigation menu, tap
2. Open the
3. The list of picutres stored on the microSD card appears. Select one picture from the
list.
4. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
location. Tap
5. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
to confirm the destination, or tap
to select a different destination.
and start your journey.
.
menu and tap
to confirm the destination, or tap
to select a different destination.
and start your journey.
49
to modify route
.
) appears at the new
to modify route