Customise Quick Menu; Traffic Settings - Alpine INE-W970BT User Manual

You can control the volume of the following sound types:
Button
Controls for each sound type:
Button

5.3.2 Customise Quick menu

The content of the Quick menu is fully customisable. Tap the button you want to change, and
select its new function from the list.

5.3.3 Traffic settings

The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button
These controls affect the volume of the guidance sounds (verbal
instructions).
Turn off the attention tone preceding verbal instructions or adjust its
volume.
These controls affect the volume of the alert sounds (beeps).
Key sounds provide audible confirmation of tapping the touch screen.
These controls affect key sounds.
Use the switch to mute the related sound. The slider becomes
inactive. Tap again to re-enable.
Adjusts the volume of the related sound.
Use this switch to enable or disable historical traffic data and traffic
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to
turn off in order not to take into account normal weekday traffic jams.
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
Description
Description
Description
74