Leveling Legs; Oven Light; Oven Window - Amana Easy Touch Control 800 Use & Care Manual

Oven Door
Leveling Legs
. De not place excessive weight on or stand on an open
oven door, This could cause the range to tip over. break
the door, or injure the user.
° Do not attempt to open or dose door or operate over until
door is properly replaced.
° Never place fingers between hinge and fron_ oven frame
Hinge arms are spring mounted, if accidentally hit. the
hinge wiii siam shut against oven frame and could injure
your fingers,
To remove:
1. When cool, open the oven door to
the first stop position {opened
about four inches}.
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
leveling !egs to the flOOr,This bracket Prevents the range
from accidentally tipping.
Oven Light
(style varies by modeU}
Allow oven to COOl b efore replacing !ight bulb.
- Make sure bu!b cover and bulb are coo! before touching.
To replace oven light bulb:
1. When oven iscool, hold bulb cover
in place, then slide wire re-
tainer off cover. Note: Bulb
cover wiii fail if not held in
place while removing wire
retainer.
BULBCOVER
2. Remove bulb cover and light bulb.
3. Replace with a @-watt appliance bulb.
a.
RETAINER
Replace bulb cover and secure with wire retainer.
Reconnect power to range. Reset clock.
OR
1. Use a dry potholder and very carefully unscrew bulb cover
and bulb.
2. Replace with a ao watt, oven-rated appliance bulb. Bulb
with a brass base is recommended to prevent fusing of
bulb into socket.
3. Replace bulb cover and reconnect power to range.
4. Reset clock.
22