Vertex Standard EVX-5400 Operating Manual page 28

s s
tatus Et
You can change the 5-tone status code using this function:
r Press, (or press and hold), the assigned PF key to change the 5-tone status
code.
r Select the desired digit to be changing by pressing the [ P1 ] / [ P2 ] keys, then
change the number by pressing the [  ] / [  ] keys.
r Press the [ P4 ] key to store the new number to the 5-tone status code. The dis-
play indicates "- SET -" briefly, then reverts to the normal channel indication.
You may cancel the new setting by pressing the [ P3 ] key. In this case, the dis-
play indicates "-CANCEL-" briefly.
Note: If the optional MH-75
5-tone status code directly from the microphone's numeric ([ 0 ] - [ 9 ]) key.
s u /d
tatus p oWn
Press, (or press and hold), the assigned PF key to select a 5-tone status code from
the pre-defined status list.
s c
tatus HEcK
Press, (or press and hold), the assigned PF key to check the 5-tone receive status
code. When you press this key, the display will indicate the "Message" corre-
sponding to the receive status condition per the pre-defined status list.
d
uty
Press, (or press and hold), the assigned PF key to toggle the Duty function of the
2-tone, 5-tone or MDC1200
When the Duty function is set to "On", the display indicates "DUTY ON" briefly
and the user will always hear (depending on the sub-audio signaling) all traffic on
the paging channel. The radio will sound the paging alert when it receives the pro-
grammed 2-tone, 5-tone or MDC1200
When the Duty function is set to "Off", the display indicates "DUTY OFF" briefly
and the user will NOT hear normal radio traffic on the paging channel. The radio
will sound the paging alert and unmute only when it receives the programmed
2-tone, 5-tone or MDC1200
Id c
HEcK
This function allows logged ID of the DTMF Signaling or 5-tone Signaling to be
reviewed and relayed (5-tone Signaling only) to a specific station:
r Press, (or press and hold), the assigned PF key to display the logged ID of the
DTMF Signaling or 5-tone Signaling.
26
a o
dvancEd
16-Keypad Microphone is used, you may enter the
A8J
decoder "On" and "Off".
®
.
®
.
®
pEratIon
EVX-5400 O
pErating
M
anual