Vertex Standard EVX-5400 Operating Manual page 16

Hide thumbs Also See for EVX-5400:
Table of Contents

Advertisement

aF m
v
InImum
olumE
Press, (or press and hold), the assigned PF key, the display indicates "AFATT
ON" briefly, and reduce the audio output to the (lower) level programmed. Again
press, (or press and hold), the assigned PF key, the display indicates "AFATT OF"
briefly, and resume normal audio output level. You may change the programmed
(lower) level by the "User Set (Menu)" mode. See page 32 for more information.
cH a
nnouncEmEnt
Press, (or press and hold), the assigned PF key to select the channel change confir-
mation between "beep" (indicates "BEEP" briefly) and "announcement" (indicates
"ANNOUNCE" briefly).
W
HIspEr
Press, (or press and hold), the assigned PF key, the display indicates "WHISP
ON" briefly, and increase the microphone gain; allowing you to speak in a low
voice (whisper) temporarily. Press again, (or press and hold again), the assigned
PF key, the display indicates "WHISP OF" briefly, and resume normal micro-
phone gain.
vox
Press, (or press and hold), the assigned PF key, the display indicates "VOX O.N"
briefly, and activates the VOX function; allowing hands-free, automatic activation
of the transmitter, based on voice input into the microphone. When the VOX func-
tion is activated, a small dot (".") will be indicated at the bottom right of the dis-
play. You may disable the VOX function temporarily by pressing the PTT switch.
Press again, (or press and hold again), the assigned PF key, the display indicates
"VOX OFF" briefly, and resume normal operation.
vox s
Et
You can manually adjust the VOX Gain using this function:
r Press, (or press and hold), the assigned PF key. A tone will sound, and the cur-
rent VOX Gain level will appear on the display.
r Press the [  ] / [  ] key to select the desired VOX Gain level. Available selec-
tions are "VOXLV –8" to "VOXLV +8".
r Press the [ P4 ] key to store the new setting. The display indicates "- SET -"
briefly, then reverts to the normal channel indication.
You may cancel the new setting by pressing the [ P3 ] key. In this case, the dis-
play indicates "- CANCEL -" briefly.
Note: If the optional MH-75
14
a
o
dvancEd
16-Keypad Microphone is used, you may select
A8J
pEratIon
EVX-5400 O
pErating
M
anual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents