Vertex Standard EVX-5400 Operating Manual page 24

Hide thumbs Also See for EVX-5400:
Table of Contents

Advertisement

C
all
When using the DTMF Paging System
This feature, if enabled, allows the user to send any 3-digit Page Call code, used to
call other similarly-equipped stations. Press, (or press and hold), the assigned PF
key, followed by the three digits representing the Page Call code of the station you
wish to call. Three tones will be heard after the last key is pressed (the new code
will now be transmitted).
The receiver squelch of the other station will be opened, and you can begin com-
munication.
When using the 2-tone/5-tone Signaling System
This feature, if enabled, Press, (or press and hold), the assigned PF key to send a
2-tone/5-tone sequential tone.
When using the MDC1200 System
This feature, if enabled, Press, (or press and hold), the assigned PF key to send
an MDC1200 code. Available codes are "CALL ALT", "SEL CALL", "RADIO
CH", "STUN" and "REVIVE".
 Press , (or press and hold), the assigned PF key to enter the "Call Menu"
mode.
 Press the [  ] / [  ] keys (or [ P1 ] / [ P2 ] keys) to select the desired Call mode,
then press the [ P4 ] key to accept the selection. (You may cancel the selection
by pressing the [ P3 ] key).
 Press the [  ] / [  ] (or [ P1 ] / [ P2 ] keys) to select the station to be called.
Note: If the optional MH-75
ter the station's ID number (four digits) directly from the microphone's key ( [ 0 ]
- [ 9 ] , [ A ] - [ D ] , [ # ] : substitute for "E", and [ Ý ] : wild card).
 Press the PTT switch to send an MDC1200 call.
When operating in the Digital mode
This feature, if enabled, allows the user confirm and/or edit the Contact Alias.
 Press, (or press and hold), the assigned PF key to enter the "Call Menu"
mode.
 Press the [  ] / [  ] keys (or [ P1 ] / [ P2 ] keys) to select the desired Contact
Alias. You may find the "New List" and "Manual" category at the last of the
indication loop. Describes these two functions later.
 Press the [ P4 ] key to accept the selection.
You may cancel the selection by pressing the [ P3 ] key.
22
a
O
dvanCed
16-Keypad Microphone is used, you may en-
A8J
peratiOn
EVX-5400 O
pErating
M
anual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents