Care And Maintenance - Sennheiser ew 100 G2 Instructions For Use Manual

38
... for multi-channel operation
For multi-channel operation, you can only use the channels in a channel
bank. Each of the channel banks "1" to "8" accommodates four factory-
preset frequencies which are intermodulation-free. For alternative fre-
quency combinations, please refer to the enclosed frequency table. The fre-
ely selectable frequencies can be selected via the "TUNE" menu and can be
stored in the channel bank "U".
When using several transmitters simultaneously, interference can be avoi-
ded by maintaining a minimum distance of 20 cm between two transmit-
ters.
Use special accessories for multi-channel applications (see: „Accessories"
on page 45).

Care and maintenance

Use a slightly damp cloth to clean the units from time to time.
Note:
Do not use any cleansing agents or solvents.
To clean the SKM 100 G2's sound inlet basket, proceed as follows:
Unscrew the sound inlet basket (turn counterclockwise) and remove it.
Remove the foam insert.
Use a slightly damp cloth to clean the sound inlet basket from the inside
and ouside.
Reinsert the foam insert.
Replace the sound inlet basket on the SKM 100 G2 and screw it tight
(taking care not to loose the colored identification ring).