Triggering On Video Signals - Fluke ScopeMeter 192B User Manual

Triggering on Video Signals

To trigger on a video signal, first select the standard of the
video signal you are going to measure:
1 Apply a video signal to the red input A.
2 Display the
3 Open the Trigger Options menu.
4 Select Video on A ... to open the
Trigger on Video menu.
5 Select positive signal polarity for
video signals with negative going
sync pulses.
key labels.
TRIGGER
Triggering on Waveforms
Triggering on Video Signals
Figure 32. Measuring Interlaced Video Signals
6 Select the video standard and
return.
Trigger level and slope are now fixed.
Observe that the key labels at the bottom of the screen
have been changed to allow further selection of specific
video trigger settings:
5
59