Table of Contents
Advertisement
F-36 PRO Laminator Operation Manual
ALWAYS CHECK THE SENSORS PRIOR TO
OPERATION! The sensors must be clean and
contact the roll to maintain proper roll operating
temperatures. The rolls can overheat and cause a
fire or seriously damage the laminator.
7. Plug the laminator into an approved socket or have
a certified electrician wire the laminator directly to
a power source.
The laminator requires 30A single phase service
and a power receptacle that accepts a 30A 250V
NEMA L6-30P plug or, in Europe, 3 phase, 240/
400 VAC with 20A per phase. See Figure 2-6 for
power cord connection options.
8. Replace both cabinet covers.
© GBC Pro-Tech 1999 January
WARNING
LINE 1
EUROPEAN
3–PHASE Y
A
N
LINE 3
LINE 2
A
THE EUROPEAN
THREE-PHASE (STAR)
LINE 1
SINGLE PHASE (U.S.)
LINE 2
LINE 1
LINE 2
Figure 2-6: Power Cord Connection
Installation
LINE–1
LINE–2
LINE–3
N
JUMPER
U.S. SINGLE PHASE
JUMPER
2-7
Advertisement
Table of Contents
