Setup - GBC Laminator Operation And Maintenance Manual

F-60 Operation and Maintenance Manual
Brake
Adjustment
Knob
Core
Support
LOWER UNWINDS
Figure 3-6: Brake Configuration
© GBC Pro-Tech 1998 July
Process control charts allow you to record the way you
thread film through the machine's rolls and idlers
(called webbing) and the control settings for each prod-
uct and process. Process control charts are an excellent
tool for training new operators. They provide a "road
map" for correct machine setup and operation.
This section contains a blank process control chart and
diagram for the F-60 as well as completed charts for
the basic operations of the laminator.
GBC Pro-Tech laminators respond in a very accurate
and repeatable manner. The charts provide a way to set
up each time, every time for repeatable performance by
assuring that all controls are set to optimum.
The process control charts should be kept in this man-
ual or in a book close to the laminator. Use the machine
to encapsulate the popular charts so they can withstand
food and coffee spills and so they are always available
for ready reference.
Core
NOTE
Chuck
When trying new products and processes, remember
that GBC Pro-Tech's customer service representatives
are only a phone call away.
The completed process control charts included in this
section are based on Orca-Film and typical prints.
Operation
3-5