GBC Laminator Operation And Maintenance Manual page 32

Operation
Product: ____________________ Process: Cold Mount & Laminate (Second Pass)
Speed: 0-6 fpm (0-180 cpm)
Roll Pressure: Trial
Cooling: Off
NOTE
Guard is removed for this operation. Use footswitch to load, then accelerate materials through rolls.
3-14
FRONT CONTROL SETTINGS
Cold Mount and Laminate (Second Pass)
Release Liner
(Peel prior to nip)
Foam
Core
F-60 Operation and Maintenance Manual
Reverse/Forward: Forward
Top Heater: 32-105 ºF (0-40 ºC)
Bottom Heater: 32 ºF (0 ºC)
Hold
Encapsulated
Image
Date: ________________
© GBC Pro-Tech 1998 July