GBC 80-99 Operating & Maintenance Manual page 26

Operations
Process: Hot Mount, One Pass
Materials (top/bottom): /3/16" thick Hot tissue coated board
Front Control Panel
Adjustments
Top Brake
Top Clutch
Laminator Roller
Bottom Brake (front)
Bottom Clutch (front)
Forward/Reverse
Speed
Laminator Roller Shims
Helpful Hints/Notes:
Lay the image to be mounted on the board and push the board into the nip while the rolls are not
turning. Then, quickly, depress the foot switch to turn the rolls. Make sure to maintain good
paper tension while mounting the image.
Page 5 - 12
Orca 80-99 Operation and Maintenance Manual
PROCESS CONTROL CHART 2-2
OFF / NA Top Heat
OFF / NA Bottom Heat
ON / 40 p.s.i. Top Cooling Fans
OFF / NA Bottom Cooling Fans
OFF / NA Pull Roller Clutch
FORWARD Pull Roller Pressure
2 - 3 f.p.m. Bottom Brake (rear)
3/16" Bottom Clutch (rear)
Rear Control Panel
Adjustments
Pull Roller Shims
© GBC Films Group June 2000
o o
ON / 245 F (118 C)
OFF / NA
OFF
OFF
OFF / NA
OFF / NA
OFF / NA
OFF / NA
NA