Table of Contents
Advertisement
Orca 80-99 Operation and Maintenance Manual
SAFETY
READ THIS SECTION BEFORE
OPERATING THE ORCA 80-99 LAMINATOR!
FOR YOUR SAFETY:
Your safety as well as the safety of others is important to
GBC Pro-Tech. In this instruction and on the product
are important safety messages. Read these messages
carefully.
1. Read all these instructions.
2. Save these instructions for later use.
3. Follow all warning and instructions marked on the
product.
4. Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
5. Do not use this product near water.
6. This product should be operated from the type of
power source indicated on the marking label. If you are
not sure of the type of power available, consult your dealer
or a qualified and certified electrician.
7. Do not allow anything to rest on the power cord. Do
not locate this product where persons will walk on the
cord.
8. Never push objects of any kind into this
product through any slots as they may touch dangerous
voltage points or short out parts that could result in a risk
of fire or electric shock. Never spill liquid of any kind on
the product.
9. Do not attempt to service this product yourself, as
opening or removing covers may expose you to dangerous
voltage points or other risks. Refer all servicing to service
personnel.
© GBC Films Group June 2000
10. Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
A. When the power cord is damaged or frayed.
B. If liquid has spilled into the product.
C. If the product has been exposed to rain or water.
WARNING:
Never place fingers or arms between the rollers
when they are turning or when the rollers are in
the closed position.
D. If the product does not operate normally when the
operating instructions are followed. Adjust only those
controls that are covered by the operating instructions
since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.
E. If the product exhibits a distinct change in performance,
indicating a need for service.
Safety Information
WARNING:
It is vital that everyone working around the
laminator rolls avoid wearing loose-fitting clothing,
ties or dangling jewelry which could be caught in
the nip.
The GBC Pro-Tech laminator has been designed with
operator safety as a primary consideration. However,
operators must become thoroughly familiar with the
controls, and proper operation and safety features of the
machine before starting to use the unit.
Safety
Page 1 - 1
Advertisement
Table of Contents
