Mode Selector - Pyle PLD96MU Manual

Am/fm-mpx dvd/vcd/svcd/cd/mp3/mp4 player receiver w/usb interface & sd/mmc card reader
Table of Contents

Advertisement

0$,1 81,7 ² *(1(5$/ 23(5$7,21
RESET OF THE UNIT
Operating the unit for the first time or after replacing the car battery, it is necessary to reset
the unit. Press RESET (1) on the main unit with a pointed object (such as a ball point pen)
to reset the unit to initial setting by the factory (default stage). When there are errors occur
or malfunction appears on the unit, press RESET (1) can also resume the unit to default
stage. It will also erase all the setting and memorized functions of the unit.
POWER ON/OFF CONTROL
Press
(2) to turn on the unit, press it again to turn off the unit. All the memorized setting
will retain after the unit turned off.

MODE SELECTOR

Continuously pressing MOD (6) to choose your desired modes among radio, disc, USB
input, SD/MMC card input and auxiliary input operation.
VOLUME & AUDIO CONTROL
Rotate VOLUME CONTROL (8) clockwise to increase the sound level, rotate it anti-
clockwise to decrease the sound level. Continuously pressing FUNCTION SELECTOR (8)
Æ
Æ
to activate the following audio control modes: BASS (BAS)
TREBLE (TRE)
BALANCE (BAL) Æ FADER (FAD) Æ VOLUME (VOL) Æ, by rotating FUNCTION
SELECTOR (8) clockwise or anti-clockwise to have your desired setting.
Note
When preset equalizer control is in activated, bass and treble will resume to its default stage.
PRESET EQUALIZER CONTROL
Press and hold FUNCTION SELECTOR (8) for two seconds to activate the preset equalizer,
rotate FUNCTION SELECTOR (8) clockwise or anti-clockwise to select your desired audio
equalization in the following orders:
DSP OFF
CLASSIC
POP
ROCK
Note
When preset equalizer control is activated, bass and treble will resume to its default stage.
MUTE CONTROL
Press MUTE (10) to cut down the sound output, press it again to release the mode and
recover to the previous volume level.
USB SLOT
Insert USB device to the USB SLOT (24) to have playback of multi-media files that recorded.
SD/MMC CARD PORT
Insert SD/MMC card to the SD/MMC CARD PORT (25) to have playback of multi-media
files that recorded.
7

Advertisement

Table of Contents
loading

Table of Contents