Table of Contents
Advertisement
OPERATION
following reasons:
-
Initial installation of the unit when all
wiring is completed.
-
All the function buttons do not operate.
-
Error symbol on the display.
Note: if you press the RESET button (27),
the unit won‟t work yet; please use a cotton
swab soaked in isopropyl alcohol to clean
the socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MODE button (15) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
In radio mode, press the BAND button
(22) to select the desired band. The
reception band will change in the
following order:
→FM1→ FM2→ FM3 → AM1→ AM2
SELECTING STATION
Press
button (9) or
to activate the automatic seek function.
Press it for several seconds until
"MANUAL" appears on the display; the
manual tuning mode is now selected. If
both buttons have not been pressed for
several seconds, they will return to seek
tuning mode and "AUTO" appears on
the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (14) for several
seconds; the radio searches from the
current frequency and checks the
signal strength until one search cycle
is finished. And then 6 strongest
stations
are
corresponding preset number button.
- Program scanning
button (8)
stored
into
the
Press the AS/PS button (14) shortly to
scan preset station. The radio will
pause at this station for a few seconds
and then resume its search.
STATION STORING
To receive a station, press one of the
preset buttons (1~6) for 2 seconds. The
current station will be stored into that
number preset.
CD OPERATION
SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed
side
uppermost
compartment. CD playback should
begin.
If a CD is already inserted in the driver:
Press the MODE button (15) until the CD
mode display appears.
SELECTING TRACKS
Press
button (8) or
move to the previous track or the
following track. Track number will be
shown on the display.
Hold
button (8) or
rewind or fast forward. CD will resume
play when you release the button.
PAUSING PLAYING
Press 1|
player. Press it again to resume play.
PREVIEWING ALL TRACKS
Press the INT button (20) to play the
first several seconds of each track on
the current disc. Press again to stop
and listen to that particular track.
REPEATING THE SAME TRACK
Press RPT button (19) to continuously
repeat the same track. Press it again to
10
into
the
button (9) to
button (9) to
button (21) to pause CD
CD
Advertisement
Table of Contents
