Gateway GT5448E - GT - 2 GB RAM Reference Manual page 50

11
12
13
14
15
16
17
44
CHAPTER 4: Upgrading Your Computer
Slide the drive bay back into your computer, making
sure that the tabs on the bottom of the bay align with
and slide into the slots on the bottom of your computer.
Hard drive bay mounting slots
Secure the drive bay to your computer using the screw
you removed previously.
Connect the drive cables. If you are replacing a drive,
use your notes from
Replace the side panel by following the instructions in
"Replacing the side panel" on page
Reconnect all external cables and the power cord.
Turn on your computer.
Install Windows using the operating system DVD that
came with your computer. For more information on
restoring your system, see
on page 97.
Step 3.
33.
"Recovering your system"