Unit Installation - Pyle PL75DL Instruction Manual

MENU LANG
This item is for selecting a menu language.
4.16.3 AUDIO SETUP
KEY
It is for selecting your desired basic music tone(from low to high).
4.16.4 VIDEO SETUP
BRIGHTNESS
It is for adjusting the brightness of the video output.
CONTRAST
It is for adjusting the contrast of the video output.
SATURATION
It is for adjusting the saturation of the video output.
HUE
It is for adjusting the hue of the video output.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com

1.6 UNIT INSTALLATION

INSTALLATION INSTRUCTIONS
THE UNIT IS INSTALLED TO BE AN ANTI-THEFT ONE. THE CHASSIS
OF THE UNIT WEARS A SLIDING METAL HOUSING. PLEASE DO THE
CONNECTION OF THE POWER, SPEAKERS AND ANTENNA ACCORDING
TO THE REQUIREMENT OF THE INSTRUCTION BOOK , THEN INSTALL
THE SLIDING METAL HOUSING IN THE CAR AS FOLLOWS.
TO BOOST UP THE CAPABILITY OF
ANTI-JAMMING, PLEASE FIX THE
METAL STRAP ON THE METAL
CONNECTED TO THE BOTTOM
BRACKET OF THE CAR.
METAL STRAP
DASH BOARD
SLIDING METAL HOUSING
FIXED THE REAR CABINT WITH THE SCREWS,
YOU CAN PUSH OUT THE FRONT PANEL
TO DRAW THE CHASSIS OUT OF
THE SLIDING METAL HOUSING,
INSERT THE LEFT AND RIGHT KEY
PLATES INTO THE RIGHT POSITION
OF THE 2 SIDES OF CHASSIS.
SELECT THE PROPER TAB
FOR FIXING THE SLIDING
METAL HOUSING.
REAR CABINET
FRONT PANEL