Adding Or Replacing Add-In Cards - Gateway E-6100 User Manual

Adding or replacing add-in cards

An add-in card is a card used in your computer to add functionality to the
system. Use the following instructions to replace, add, or reseat an add-in card.
To replace, add, or reseat an add-in card:
1
Open the case using the instructions in
2
For more stability, place your computer on its side. Place your computer
on a towel or other non-abrasive surface to avoid scratching the
computer case.
3
If you are replacing a card, disconnect any cables that are attached to the
card, noting their locations and orientation. (You will reconnect the cables
after you install the new card.) See the add-in card documentation for
further instructions.
Retention thumbscrew
www.gateway.com
Adding or replacing add-in cards
"Opening the case" on page 92.
103