Chapter 9 Universal Repeater Mode
9.6.3 WPA(2)-PSK
Figure 51 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
The following table describes the labels in this screen.
Table 32 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK
LABEL
Universal Repeater Parameters
SSID
Channel Selection
Security Mode
Encryption Type
Pre-Shared Key
Apply
Cancel
9.7 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration >
Network > Wireless LAN > Site Survey to open the following screen.
Figure 52 Configuration > Wireless LAN > Site Survey (Universal Repeater)
78
DESCRIPTION
Enter the name of the access point to which you are connecting.
The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a
channel.
Select the channel number used by the access point to which you are connecting.
Select WPA-PSK or WPA2-PSK if the access point to which you want to connect uses
WPA-PSK or WPA2-PSK.
Select the type of wireless encryption employed by the access point to which you want to
connect.
WPA-PSK or WPA2-PSK uses a simple common password for authentication.
Type the password employed by the access point to which you want to connect.
Click Apply to save your changes back to the NBG4615 v2.
Click Cancel to reload the previous configuration for this screen.
NBG4615 v2 User's Guide