Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Edimax AR-7211A V2
Summary of Contents for Edimax AR-7211A V2
- Page 1 AR-7211A/B V2 Quick Installation Guide 10-2012 / v1.0...
- Page 2 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
-
Page 3: Product Introduction
Before you start using this product, please check if there is anything missing in the package and contact your dealer to claim the missing item(s): ADSL2+ router (AR-7211A V2 or AR-7211B V2) Power adapter 1 meter RJ-45 Ethernet cable 1.8M RJ-11 telephone line x 2 Quick installation guide... - Page 4 LEDs Color Status Description Green Powered on Powered off ADSL broadband initial self-test failed or upgrading firmware ADSL Green ADSL line is synchronized and ready to use SLOW ADSL synchronization failed ( Please refer to Note BLINK FAST BLINK ADSL negotiation is in progress. Internet Green Internet connected in router mode...
-
Page 5: Getting Started
Items Description Power ON/OFF Power connector LAN Ethernet RJ-45 port Resets device to factory defaults Reset (to reset to factory defaults, push a paper clip into the hole when the device is powered and hold for more than 10 seconds) Line Line RJ-11 port GETTING STARTED A. - Page 6 Step 4: Check the ADSL LED status Please check the ADSL LED on the front panel. This light indicates the status of your ADSL broadband through your telephone line. If the light is on, you can continue setup. However if the light is flashing, there is no broadband line detected.
- Page 7 Click “Switch to Classic View” in the top left to show additional setting icons. Locate the “Network Connections” icon and double-click to open network connection settings. Select the “Local Area Connection” icon and right-click it to open the sub-menu, then select “Properties”. Select “Internet Protocol (TCP/IP)”...
-
Page 8: Internet Connection
Ensure that “Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected and then press “OK”. B. Internet Connection You can configure the router by running the setup wizard on the CD-ROM included in the package contents. The wizard enables you to configure your Internet connection, upgrade the firmware and change the router’s password. - Page 9 Alternatively, if you lose the CD-ROM or prefer a web based setup, you can login to the ADSL router using Internet Explorer, and configure the router from there using the web-based interface. Please follow the instructions below: 1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “Enter”.
- Page 10 3. You will arrive at the system status page as shown below. 4. In the navigation bar across the top of the screen, click “Wizard”. The Wizard page of the web-based interface allows fast configuration of the Internet connection and other parameters. Please refer to the user manual for detailed information on these parameters.
-
Page 11: Declaration Of Conformity
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Council directive (2004/108/EC, 92/31/EEC, 2006/95/EC). Equipment Fast Ethernet ADSL2/2+ Modem Router Model No. AR-7211A V2 / AR-7211B V2...