Alpine IVA-W520R Owner's Manual page 84

When Connecting External Equipment
(White/Brown)
(White/Brown)
(Orange/White)
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.
• Do not make the two switches to different settings.
• Be sure to turn the power off to the unit before changing the switch
position.
CAMERA Input Connector
Use when connecting a back-up camera.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
Video/Audio Input Connectors (AUX INPUT)
REMOTE OUT
REMOTE IN
REVERSE
Use only when back-up camera is connected.
To Audio Input terminal
Rear monitor
(Sold Separately)
To Video Input terminal
To Video Output terminal
Back-up camera
(Sold Separately)
To Video Output terminal
TV Tuner or VCR
(Sold Separately)
To Audio Output terminal
REMOTE IN (White/Brown)
REMOTE OUT (White/Brown)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
RCA Extension Cable (Sold Separately)
AUX I/O Camera In Connector
85
-EN