Playing Mp3/Wma/Aac Data (File Play Mode); Displaying Divx ® Disc Information; Radio Setup; Radio Setup Operation - Alpine IVA-W520R Owner's Manual

Mobile media station
Table of Contents

Advertisement

Playing MP3/WMA/AAC Data (FILE PLAY
MODE)
When using discs containing both audio data and MP3/WMA/AAC
data.
Setting item: FILE PLAY MODE
Setting contents: CD / CMPM
CD:
Plays only the audio data on discs containing both
audio data and MP3/WMA/AAC data.
CMPM: Plays only the MP3/WMA/AAC files on discs containing
both audio data and MP3/WMA/AAC data.
• Insert the disc when playback is stopped and remove the disc from
the unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
®
Displaying DivX
Disc Information
Setting item: DivX INFO.
If [
] of DivX INFO. is touched, a DivX
code is displayed.
34
-EN

RADIO Setup

Radio Setup Operation

The Parking Brake must be engaged to access the RADIO
mode screen. Attempting to access this screen while driving
will display the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
"Setting item" of Radio Setup. Refer to each section for details.
1
2
3
®
file registered
4
Setting items:
5

RDS Time Display

When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS CLOCK DISP
Setting contents: OFF / ON

Adjusting Source Signal Levels

If the difference in volume level between the CD and FM radio is too
great, adjust the FM signal level as follows.
Setting item: FM LEVEL
Setting contents: LOW / HIGH
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
Touch [SOURCE SETUP].
The SOURCE SETUP screen appears.
Touch [
] of RADIO SETUP.
The RADIO setup screen appears.
Touch [ ] or [ ] of the desired item to change its
setting.
RDS CLOCK DISP / FM LEVEL / PI SEEK / RDS REGIONAL /
PTY LANGUAGE / PTY31
Touch [
] to return to the previous screen.
Touch and hold [
] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
OFF: To adjust it manually.
ON:
Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents