Adding Or Replacing Memory - Gateway 400 User Manual

Chapter 15: Upgrading Your Notebook

Adding or replacing memory

Your notebook uses memory modules called SO-DIMMs (Small Outline Dual
Inline Memory Modules). The modules are available in various capacities and
any module can be placed in any available slot. Use only memory modules
designed for the Gateway 400SD4 for upgrading your memory.
Memory
bay
To add or replace memory modules:
1
Follow the instructions under "Preventing static electricity discharge" on
page 210.
2
Turn off your notebook, disconnect the AC adapter and modem and
network cables.
3
Turn your notebook over so that the bottom is facing up.
4
Remove the battery. For more information, see "Changing the battery" on
page 125.
5
Loosen the memory bay cover screw, then remove the memory bay cover.
212 www.gateway.com