Connecting The Usb Hub - Gateway XHD3000 User Manual

4

Connecting the USB hub

Your monitor has a built-in, powered, USB 2.0 6-port hub. When
connected to your computer's USB port, the hub provides six
USB ports for connecting as many as six USB-compatible
devices.
hub must be connected to a USB 2.0 port on your computer. If the hub is
connected to a USB 1.1 port, the monitor's ports will provide only the slower
USB 1.1 connections.
the EzTune installation CD.
To connect the USB hub:
1
2
20
CHAPTER 2: Setting Up Your Monitor
Plug the speaker bar's power and audio plugs into the
appropriate connectors underneath the monitor.
Speaker bar power
For information on using the speaker bar, see
speaker bar" on page
Important
For the monitor's USB hub to provide high-speed USB 2.0 connections, the
Important
This monitor requires a driver to work correctly. The driver is included on
Turn on your computer, then install the EzTune software
from the included EzTune installation CD.
Position your monitor so you can reach the back.
Speaker bar audio
40.
"Using the