Starting The Monitor; Turning On The Monitor - Gateway XHD3000 User Manual

Starting the monitor

first install the included EzTune software onto your computer.

Turning on the monitor

To start the monitor:
1
2
28
CHAPTER 3: Using Your Monitor
Caution
If you plan to connect your monitor's USB hub to the computer's USB port,
Touch the power button on the front of monitor. The
power LED on the power button changes from purple
(off) to blue (on), then turns amber/orange (standby) if
no video source is detected.
Tip
For more information on using your monitor's touch buttons, see
"Using the EzTouch menu" on page
Turn on your computer. After your computer is running,
the power LED on the monitor's power button should be
blue, indicating that the monitor has detected a video
source. Allow about 15 seconds for the display image to
appear.
If you do not see an image after waiting 15 seconds,
check the color of the power button light.
•
No light—The monitor is not receiving power. Make
sure that the monitor is plugged into an AC outlet.
•
Purple—The monitor is turned off. Press the power
button to turn it on.
29.
Power button