Speaker Bar Specifications - Gateway XHD3000 User Manual

Speaker bar specifications

Specifications are subject to change without notice or
obligation. Many products for Gateway and its subsidiaries are
custom engineered by our suppliers to Gateway specifications
and may vary from similarly marketed products.
Amplifier power output
Signal-to-noise ratio
Audio input impedance
Audio Input line level
Power supply
Operating supply range
Subsonic EQ
Audio processor
Stereo enhancement
Amplifier turn on/off
delay
Amplifier mute/standby
Thermal protection
Short circuit protection
Overload protection
Under voltage protection
Reverse power protection
Cooling
Power amplifier
76
APPENDIX A: Specifications
7 Watts RMS x 2 channels at 8 Ω and ≤ 10% THD+N
(Amplifier filters flat. Audio Precision Analyzer filters:
10-22KHz, 12.0VDC In)
> 65 dBA (reference: 1 watt into 8 Ω)
> 10K Ω
0.7Vrms at 10% THD (Vol = Max, Bass/Treble = Flat,
■
3D Off)
0.35Vrms at 10% THD (Vol = Max, Bass/Treble =
■
+6dB, 3D Off)
12VDC ± 0.4VDC, 2.0 Amps minimum
10.0VDC to 16.0VDC
Fixed response
Volume, Bass, Treble, and Stereo enhance. I2C interface
Yes
< 0.2 seconds, noiseless
Yes, activated by I2C Interface and headphone insertion
Yes
Yes
Yes
Yes
Yes, polarized power plug, positive center pin
Passive convection
Class D