Chapter 1: Using Your Gateway Flat-Panel Monitor; Connecting The Monitor; Connecting Video Inputs - Gateway MW19 User Manual

Connecting the monitor

Connecting video inputs

2

CHAPTER 1: Using Your Gateway Flat-Panel Monitor

To connect video sources to your monitor:
1
Position your computer and the monitor so you can reach the back of each.
2
Connect the blue VGA video cable to the blue VGA video connector under the back of the
display.
3
Ensure your computer is turned off. Connect the other end of the VGA cable to the video
port on the back of your computer.
- OR -
If your computer has a digital video connector (DVI option), connect a DVI video
(option)
to the white connector under the back of the display.
cable