Panasonic KX-TG7301E Operating Instructions Manual page 44

Digital cordless phone
Hide thumbs Also See for KX-TG7301E:
Table of Contents

Advertisement

TG7301-7321E(e).book Page 44 Thursday, February 14, 2008 9:26 AM
Useful Information
Making/answering calls, intercom
Problem
w is flashing.
Noise is heard, sound cuts in
and out.
The handset does not ring.
The base unit does not ring.
I cannot make a call.
*1 KX-TG7321/KX-TG7322/KX-TG7323/KX-TG7324
44
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Cause/solution
L The handset is not registered to the base unit.
Register it (page 26).
L The handset is too far from the base unit.
Move closer.
L The base unit's AC adaptor is not connected.
Check the connections.
L You are using the handset or base unit in an
area with high electrical interference. Place
the base unit and use the handset away from
sources of interference.
L You are using the handset or base unit in an
area with high electrical interference. Place
the base unit and use the handset away from
sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L The ringer volume is turned off. Adjust ringer
volume (page 23).
*1
L The ringer volume is turned off. Adjust ringer
volume (page 24).
L The handset is too far from the base unit.
Move closer and try again.
L Another unit is in use. Wait and try again later.
L Answering system is being used.
try again later.
L The key lock feature is turned on. Turn it off
(page 20).
*1
Wait and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents